Undersink Instant Hot Water Circulating System

One Autocirc will deliver instant hot water to all fixtures in the home with one simple undersink installation. No additional plumbing is required. The Autocirc is installed under the sink of the faucet that is farthest from the water heater. A built-in temperature sensor automatically turns the pump on when the temperature of the hot water line drops below 85deg. The pump begins drawing warm water from the water heater, pumping the cold water in the hot water supply (the water you normally pour down the drain) into the cold supply line and back to the water heater. The pump automatically turns off when the water temperature reaches 95deg. ensuring that shower warm water is available instantly with maximum temperature water only seconds behind. Instant hot water will be available at all fixtures between the water heater and the Autocirc. The Autocirc also incorporates a 24 hr. time clock allowing you to set the times of day when you want the pump to cycle.